Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
Parameter Set-up:
Starting RTP Port: enter the Port value in order to establish the start point
for the exclusive data transmission range.
Max RTP port: enter the Port value in order to establish the end point for
the exclusive data transmission range.
9.5. NAT Setting
NAT (Network Address Translation) allows hosts in an organization’s private
intranet to transparently connect to hosts in the public domain. sThere is no
need for internal hosts to have registered Internet addresses. It is a way to
translate the internal private network IP address into a legal network IP
address technology. To do this configuration on web Account > Advance >
NAT interface.
Parameter Set-up:
UDP Keep Alive Messages: If enabled, the device will send out the
massage to the SIP server so that SIP server will recognize if the device
is in online status.
UDP Alive Msg Interval: set the message sending time interval from 5-60
seconds, the default is 30 seconds.
To Next Page
Loading...
Need help?
General
