Akuvox R20A Series User Manual

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
20
9.Network Setting
9.1. Network Status
To check the network status on the web Status > Network Information
interface.
9.2. Device Network Configuration
You can check for the door phone’s network connection info and configure
the default DHCP mode (Dynamic Host Configuration Protocol) and static IP
connection for the device on the device web Network > Basic interface.

Akuvox R20A Series Specifications

General

Installation	Wall-mounted
Protection level	IP65
RS485	Yes
Camera	2MP
Audio	Built-in microphone and speaker
Network	10/100Mbps Ethernet
Protocols	SIP, RTSP
Power	PoE or 12V DC