Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
span during which the LED light can be disabled in order to reduce the
electrical power consumption.
Parameters Set-up:
Enabled: Tick the check box if want to enable the card reader LED lighting
and vice versa.
Start Time- End Time (H): enter the time span for the LED lighting to be
valid, e.g. if the time span is set from 8-0 (Sart time- End time) it means
LED light will stay on during the time span from 8:00 am to 12:00 pm
during one day (24 hours).
To Next Page
Loading...
