- Customize the attendant set.
- Modify system management.
- Save (and use) the set individual phone book.
1.5.2 Function of keys SK1 to SK5
Depending upon the country, features may appear on different keys.
Key Label Function
SK1
EndCCI Used to cancel consultation call.
Reseiz Call again (using the same trunk).
SK2
Ring Call (i.e. ring a station).
Broker Broker call.
BargIn Used to barge in (intrude into a call conversation).
BargIn
Used to cancel barge-in.
SK3
Transf Transfer
CampOn Retrieve from routing.
OnHold Hold.
Endial End external dialing.
SK4
Overid Call the called user's forwarding destination.
Intern To answer a group call (call to the attendant group).
SK5
Releas Call release.
Next To answer the next call.
1.5.3 Using keys SK1 to SK5
1.5.3.1 Function key SK1
- With the Reseiz label displayed
This label is displayed during an outgoing call to a destination outside the system, upon
transmission of the first digit of the external number.
This function is used to renew the dialing on the same line: the system automatically
releases the line seize and the line reseizes it, providing a dial tone again and allowing the
redialing.
- With the EndCCI label displayed
This function is used to release the consultation call that is being set up and return to
conversation mode with the first party (user or caller).
1.5.3.2 Function key SK2
- With the Call label displayed
Following an ordinary call or a consultation call to an internal user, this function is used to
activate ringing on the set to which the call has been connected.
If the set is free, its number is shown on the display preceded by Free.
Chapter
1
#$ % !
1-8
To Next Page
Loading...
