order to add different participants (maximum of 29) to this conference by appointment (also
called conference to n).
Caution:
If the attendant is involved in routing actions at a conference, the attendant can no longer
respond to internal or external calls. The normal and urgent waiting calls counters are, however,
updated.
Remarks:
- When a participant enters the conference, an audible beep signals their entry to the other
participants during the conversation.
- If an external trunk is alone in the conference, it will be forwarded to the attendant set after a timer.
- However, if another participant joins the conference call, this timer is canceled.
3.3.1 The conference circuit is free
The attendant dials the programmed conference prefix, followed by an access code to reserve
the multiconference circuit (3000 for this example).
After code identification, the screen shows:
3.3.2 Adding participants
First participant
After having dialed the conference number, the attendant dials the number of the first participant
in consultation call mode.
The Ring key is pressed and the called party answers. The display shows:
Chapter
3
! &$
3-8
To Next Page
Loading...
