Pressing the Apply key returns to the main menu.
6.3.2 Adjusting the overflow threshold (calls to the attendant group)
Pressing the SERVICE key and then the Thresh key allows to position the overflow threshold
of the group calls.
Pressing this key displays the programmed value on the screen: if the threshold is exceeded,
the calls are redirected according to the mutual assistance feature (if it is activated).
After pressing the Modify key, the attendant enters a new value if necessary and the
characters are displayed. When the number (from 0 to 200) has been entered, pressing the
Apply key confirms the value entered. The screen automatically returns to the main menu.
6.4 Declaring a new user
- Block diagram
Pressing the SERVICE key, then the top of the key, and then the key situated below the
Admin label allows the attendant to create new characteristics on a user set or modify those of
an already existing user. The following sub-menu appears:
Chapter
6
"() ') % !
6-6
To Next Page
Loading...
