When the attendant presses the OnHook key, the party is put on wait with the music-on-hold
or hold tone and the attendant set returns to idle position.
Note:
If the called party user does not pick up, the timer displays Camp-On label. The attendant set is called
back by the party put on hold.
When the internal set hangs up, the attendant set is called back. The display shows:
When the attendant seizes the call, on pressing the CampOn or Next key, the display shows:
The Info field indicates that the call is returned with camp-on release.
4.6 DTMF transparency
The attendant makes an outgoing call:
- by prefix or access code,
- by speed dialing,
- by programmed key.
The remote number sends the call signal:
Pressing the SERVICE fixed key activates the associated LCD block combination
and displays the following screen:
Chapter
4
$$ '!
4-6
To Next Page
Loading...
