To return to operational mode, use the ON/OFF key (see the Alcatel 4035 attendant set -
Attendant set operation 1 - Putting the set into service (status) ).
1.7.2 Attendant set in the disconnected (inactive) state
The screen shows the status of the group:
- Night Service
or
- Day Service
or
- Forwarding 1 mode
or
- Forwarding 2 mode
Regardless of the service displayed, the attendant set operation is inhibited. Only the
command for changing to the active state is available (see the Alcatel 4035 attendant set -
Attendant set operation 1 - Putting the set into service (status) ).
1.7.3 During call processing
The system completes the information provided by the labels and, at all times, displays useful
information for call processing.
1.7.3.1 Ordinary or consultation call to an internal set
The number of the called set is progressively displayed as the digits are dialed. After dialing is
complete, the screen shows the following information (from left to right):
a. Called set status:
• Free
The internal set is free and automatically placed in RESERVED/ATTENDNT
CONTROL status.
• Rings
The set is rung following camp-on ringing (press the dynamic Ring key).
• Conv
The user has answered the call. This status is also displayed if the user picks up the
receiver (off-hooks) before being rung (the user hears the music-on-hold (or other hold
tone), indicating that the set is reserved by the attendant).
• BusyEx
The user is on an external call (busy level is not indicated).
• BsyInt
The user is on an internal call (busy level is not indicated).
• Out of Service or OOS
The user set is out of service (problem with the set, a cable or equipment).
• Unobtainable/Called party cannot be reached
The called set is already being rung or is on hold or in line lockout or in communication
with a user with a call waiting or in programming.
#$ % !
1-11
To Next Page
Loading...
