Status Caller set status.
user Caller name (if known to the system).
phone book Caller directory (phone book) number (if known to the system).
Press the OnHold key to put the caller on hold.
2.5.4 Answering an external call
Status Calling trunk status.
Trnk Grp Caller name (if known to the system).
Trace To launch a call trace request.
Press the OnHold key to put the caller on hold.
From this position, the attendant can activate a consultation call to another set or release the
current call by pressing the Releas key.
Note:
For an ISDN call, the screen displays:
If calling number was not sent, the call number field is replaced by the name of the trunk group on which
the call arrived. The rest of the call procedure is as described above.
2.5.5 Answering a call to the attendant group
! &$
2-17
To Next Page
Loading...
