Alcatel-Lucent 4035 - Page 30

3456 The internal directory number of the called party.
The second line displays the functions that can be activated from this screen:
Ring To activate ringing on the called set.
CallBk To store a call-back request.
Text To send a text message to the called user (see the Alcatel 4035 at-
tendant set - Attendant set operation 2 - Text messages),
Releas To release the current call and return to the idle position.
Press the key to access the following screen. The display shows:
Entity Used to display the entity of the called set (if an entity name has
been programmed in management).
The user set is effectively called by pressing the Ring key (or Call key). The screen then
displays:
Figure 2.18: Call screen
The user answers the call and the screen shows:
Figure 2.19: Conversation screen
In this state, the attendant controls the conversation. The attendant alone can release the call
by pressing the Releas key.
Chapter
2
 ! &$ 
2-8
          