Alcatel-Lucent 4035 - Page 72

chapter can be inhibited or locked by a password. This password, managed at system
management, is requested during modification of a locked programming administrative
operation.
Pressing the SERVICE fixed key gives the attendant access to the following main menu (when
all features are authorized in system management):
Pressing on the key displays the following screen:
Set Mg Allows creation (modification or deletion) of internal users, see the Alcatel
4035 attendant set - Management from the attendant set 2 - Declaring a
new user.
Charge Allows management of metering (charging) features (see the Alcatel 4035
attendant set - Management from the attendant set 2 - Charging).
Test Start the attendant set autotest (see the Autotest ).
TrkOOS Allows the attendant to designate a malfunctioning trunk and to make it
unavailable to the system (see the Alcatel 4035 attendant set - Manage-
ment from the attendant set 2 - Decommissioning a defective trunk or ex-
ternal line).
NBSets Displays the number of sets in the installation and the number of sets with
direct seizure rights.
Overfl Allows the attendant to program overflow between attendants (see the
Alcatel 4035 attendant set - Management from the attendant set 2 - Over-
flow between attendant groups (Mutual Assistance)).
Date Allows the attendant to modify the date and hour within the system (see
the Alcatel 4035 attendant set - Management from the attendant set 2 -
Date - Time).
Status Allows the attendant to modify the set status of all the attendant group
sets (see the Alcatel 4035 attendant set - Management from the attend-
ant set 2 - Status change of the attendant group sets).
COS Used to modify the different user Classes of Services (categories) (see
the Alcatel 4035 attendant set - Management from the attendant set 2 -
Assigning a COS to the user).
Chapter
5
"() ') %  ! 
5-4
          