Figure 5.29: Initial menu
Pressing the programmable key of the set or of the add-on module that the attendant wants to
program displays:
Number To enter the number required (repertory, prefix, external, speed dial).
Back Returns to the initial screen.
--- Empty in the case of a key that is not programmed, or content of the key.
Pressing the Number key displays:
The attendant can enter the number which will be assigned to this key.
Example:
Apply Confirms the number dialed.
Erase Erases the number programmed.
Chapter
5
"() ') % !
5-14
To Next Page
Loading...
