Alcatel-Lucent 7210 SAS M User Manual

Show RSVP Commands
Page 194 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
Show RSVP Commands
interface
Syntax interface [ip-int-name | ip-address] statistics [detail]
Context show>router>rsvp
Description This command shows RSVP interfaces.
ip-int-name — The name of the network IP interface. An interface name cannot be in the form of an
IP address. If the string contains special characters (#, $, spaces, etc.), the entire string must be
enclosed within double quotes.
ip-address — The system or network interface IP address.
statistics — Displays IP address and the number of packets sent and received on an interface-basis.
detail — Displays detailed information.
Output RSVP Interface Output — The following table describes RSVP interface output fields.
Label Description
Interface
The name of the IP interface.
Total Sessions
The total number of RSVP sessions on this interface. This count
includes sessions that are active as well as sessions that have been sig-
naled but a response has not yet been received.
Active Sessions
The total number of active RSVP sessions on this interface.
Total BW (Mbps)
The amount of bandwidth in megabits per second (Mbps) available to
be reserved for the RSVP protocol on the interface.
Resv BW (Mbps)
The amount of bandwidth in mega-bits per seconds (Mbps) reserved
on this interface. A value of zero (0) indicates that no bandwidth is
reserved.
Adm
Down — The RSVP interface is administratively disabled.
Up — The RSVP interface is administratively enabled.
Opr
Down — The RSVP interface is operationally down.
Up — The RSVP interface is operationally up.
Port ID
Specifies the physical port bound to the interface.
Active Resvs
The total number of active RSVP sessions that have reserved band-
width.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English