Show RSVP Commands
Page 196 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
Sample Output
*A:7210-SAS>show>router>rsvp# interface detail
===============================================================================
RSVP Interfaces (Detailed)
===============================================================================
-------------------------------------------------------------------------------
Interface : system
-------------------------------------------------------------------------------
Interface : system
Port ID : system
Admin State : Up Oper State : Up
Active Sessions : 0 Active Resvs : 0
Total Sessions : 0
Subscription : 100 % Port Speed : 0 Mbps
Total BW : 0 Mbps Aggregate : Dsabl
Hello Interval : 3000 ms Hello Timeouts : 0
Authentication : Disabled
Auth Rx Seq Num : n/a Auth Key Id : n/a
Auth Tx Seq Num : n/a Auth Win Size : n/a
Refresh Reduc. : Disabled Reliable Deli. : Disabled
Bfd Enabled : No Graceful Shut. : Disabled
Percent Link Bandwidth for Class Types
Link Bw CT0 : 100 Link Bw CT4 : 0
Link Bw CT1 : 0 Link Bw CT5 : 0
Link Bw CT2 : 0 Link Bw CT6 : 0
Link Bw CT3 : 0 Link Bw CT7 : 0
Bandwidth Constraints for Class Types (Kbps)
BC0 : 0 BC4 : 0
BC1 : 0 BC5 : 0
BC2 : 0 BC6 : 0
BC3 : 0 BC7 : 0
Bandwidth for TE Class Types (Kbps)
TE0-> Resv. Bw : 0 Unresv. Bw : 0
Resv Confirms
The total number of RSVP RESV CONFIRM messages received on
the RSVP interface.
Resv Errors
Total RSVP RESV ERROR messages received on RSVP interface.
Resv Tears
Total RSVP RESV TEAR messages received on RSVP interface.
Refresh Summaries
Total RSVP RESV summary refresh messages received on interface.
Refresh Acks
Total RSVP RESV acknowledgement messages received when refresh
reduction is enabled on the RSVP interface.
Hellos
Total RSVP RESV HELLO REQ messages received on the interface.
Bfd Enabled
Yes — BFD is enabled on the RSVP interface
No — BFD is disabled on the RSVP interface.
Label Description (Continued)
To Next Page
Loading...
Need help?
General
