Alcatel-Lucent 7210 SAS M User Manual

MPLS and RSVP
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide Page 201
statistics
Syntax statistics
Context show>router>rsvp
Description This command displays global statistics in the RSVP instance.
Output RSVP Statistics Output — The following table describes RSVP statistics output fields.
Sample Output
*A:SRU4>show>router>rsvp# statistics
===============================================================================
RSVP Global Statistics
===============================================================================
PATH Timeouts : 1026 RESV Timeouts : 182
===============================================================================
*A:SRU4>show>router>rsvp#
status
Syntax rsvp status
Context show>router>rsvp
Description This command displays RSVP status.
Output RSVP Status — The following table describes RSVP status output fields.
Label Description
PATH Timeouts
The total number of path timeouts.
RESV Timeouts
The total number of RESV timeouts.
Label Description
Admin Status
Down — RSVP is administratively disabled.
Up — RSVP is administratively enabled.
Oper Status
Down — RSVP is operationally down.
Up — RSVP is operationally up.
Keep Multiplier
Displays the keep-multiplier number used by RSVP to declare that a
reservation is down or the neighbor is down.
Refresh Time
Displays the refresh-time interval, in seconds, between the successive
Path and Resv refresh messages.
Message Pacing
Enabled — RSVP messages, specified in the max-burst command,
are sent in a configured interval, specified in the period command.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English