Alcatel-Lucent 7210 SAS M - Page 202

Show RSVP Commands
Page 202 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
Sample Output
*A:SRU4>show>router>rsvp# status
===============================================================================
RSVP Status
===============================================================================
Admin Status : Up Oper Status : Up
Keep Multiplier : 3 Refresh Time : 30 sec
Message Pacing : Disabled Pacing Period : 100 msec
Max Packet Burst : 650 msgs Refresh Bypass : Disabled
===============================================================================
*A:SRU4>show>router>rsvp#
Disabled — Message pacing is disabled. RSVP message transmis-
sion is not regulated.
Pacing Period
Displays the time interval, in milliseconds, when the router can send
the specified number of RSVP messages specified in the rsvp max-
burst command.
Max Packet Burst
Displays the maximum number of RSVP messages that are sent in the
specified period under normal operating conditions.
Label Description (Continued)