Alcatel-Lucent 7210 SAS M - Page 206

Tools Commands
Page 206 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
clear
Syntax clear id tunnel-id lsp-name
Context tools>perform>router>mpls>tp-tunnel
Description Clears all the MPLS-TP linear protection operational commands for the specified LSP that are cur-
rently active.
Parameters tunnel-id — Specifies the tunnel number of the MPLS-TP LSP
Default none
Values Text name of up to 32 characters
lsp-name — Specifies the name of the MPLS-TP LSP.
Default none
Values 1 - 61440
force
Syntax force id tunnel-id lsp-name
Context tools>perform>router>mpls>tp-tunnel
Description Performs a force switchover of the MPLS-TP LSP from the active path to the protect path.
Parameters tunnel-id — Specifies the tunnel number of the MPLS-TP LSP
Default none
Values Text name of up to 32 characters
lsp-name — Specifies the name of the MPLS-TP LSP.
Default none
Values 1 - 61440
lockout
Syntax lockout tunnel-id lsp-name
Context tools>perform>router>mpls>tp-tunnel
Description Performs a lockout of protection for an MPLS-TP LSP. This prevents a switchover to the protect path.
Parameters tunnel-id — Specifies the tunnel number of the MPLS-TP LSP
Default none
Values Text name of up to 32 characters