MPLS and RSVP
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide Page 207
lsp-name — Specifies the name of the MPLS-TP LSP.
Default none
Values 1 - 61440
manual
Syntax manual tunnel-id lsp-name
Context tools>perform>router>mpls>tp-tunnel
Description Performs a manual switchover of the MPLS-TP LSP from the active path to the protect path.
Parameters tunnel-id — Specifies the tunnel number of the MPLS-TP LSP
Default none
Values Text name of up to 32 characters
lsp-name — Specifies the name of the MPLS-TP LSP.
Default none
Values 1 - 61440
trap-suppress
Syntax trap-suppress number-of-traps time-interval
Context tools>perform>router>mpls
Description This command modifies thresholds for trap suppression. The time-interval parameter is used to sup-
press traps after a certain number of traps have been raised within a period. By executing this com-
mand, there will be no more than number-of-traps within time-interval.
Parameters number-of-traps — Specifies to suppress the number of traps raised within a period.
Values 100 — 1000, in multiples of 100
time-interval — Specifies to suppress a certain number of traps raised within a period.
Values 1 — 300
To Next Page
Loading...
