Alcatel-Lucent 7210 SAS M User Manual

LDP Configuration Commands
7210 SAS M, T, X, R6, Mxp MPLS Configuration Guide Page 277
Default no implicit-null-label
maximum-recovery-time
Syntax maximum-recovery-time interval
no maximum-recovery-time
Context config>router>ldp
Description This command configures the local maximum recovery time.
The no form of the command returns the default value.
Default 120
Parameters interval — Specifies the length of time in seconds.
Values 15 — 1800
neighbor-liveness-time
Syntax neighbor-liveness-time interval
no neighbor-liveness-time
Context config>router>ldp
Description This command configures the neighbor liveness time.
The no form of the command returns the default value.
Default 120
Parameters interval — Specifies the length of time in seconds.
Values 5 — 300
import
Syntax import policy-name [policy-name …upto 5 max]
no import
Context config>router>ldp
Description This command configures import route policies to determine which label bindings (FECs) are
accepted from LDP neighbors. Policies are configured in the config>router>policy-options context.
If no import policy is specified, LDP accepts all label bindings from configured LDP neighbors.
Import policies can be used to limit or modify the routes accepted and their corresponding parameters
and metrics.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English