Alcatel-Lucent 7210 SAS M User Manual

Show Commands
Page 294 7210 SAS M, T, X, R6, Mxp MPLS Configuration
Guide
vc-type — Specifies the VC type to display.
Values ethernet , vlan , mirror
vc-id — Specifies the VC ID to display.
Values 1 — 4294967295
service-id — Specifies the service ID number to display.
Values 1 — 2147483647
Output LDP Bindings Output — The following table describes the LDP bindings fields.
Sample Output
*A:Dut-A# show router ldp bindings
===============================================================================
LDP LSR ID: 10.20.1.1
Label Description
Legend
U: Label In Use
N: Label Not In Use
W: Label Withdrawn
S: Status Signaled Up
D: Status Signaled Down
E: Epipe service
V: VPLS service
M: Mirror service
A: Apipe service
F: Fpipe service
I: IES service
R: VPRN service
P: Ipipe service
WP: Label Withdraw Pending
C: Cpipe service
TLV: (Type, Length: Value)
Type
The service type exchanging labels. The possible types displayed are
VPLS, Epipe, Spoke, and Unknown.
VCId
The value used by each end of an SDP tunnel to identify the VC.
SvcID
The unique service identification number identifying the service in the
service domain.
Peer
The IP address of the peer.
EgrIntf/LspId
Displays the LSP Tunnel ID (not the LSP path ID).
IngLbl
The ingress LDP label.
U — Label in use.
R — Label released.
EgrLbl
The egress LDP label.
LMTU
The local MTU value.
RMTU
The remote MTU value.
No. of Service
Bindings
The total number of LDP bindings on the router.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English