Alcatel-Lucent 7210 SAS M - Page 314

Show Commands
Page 314 7210 SAS M, T, X, R6, Mxp MPLS Configuration
Guide
hello
Syntax hello [detail]
no hello
Context debug>router>ldp>peer>packet
Description This command enables debugging for LDP hello packets.
The no form of the command disables the debugging output.
Parameters detail — Displays detailed information.
init
Syntax init [detail]
no init
Context debug>router>ldp>peer>packet
Description This command enables debugging for LDP Init packets.
The no form of the command disables the debugging output.
Parameters detail — Displays detailed information.
keepalive
Syntax [no] keepalive
Context debug>router>ldp>peer>packet
Description This command enables debugging for LDP Keepalive packets.
The no form of the command disables the debugging output.
label
Syntax label [detail]
no label
Context debug>router>ldp>peer>packet
Description This command enables debugging for LDP Label packets.
The no form of the command disables the debugging output.
Parameters detail — Displays detailed information.