Basic CLI Command Reference
160 Basic System Configuration Guide
Sample Output
*A:bksim3107# show system candidate
===============================================================================
Candidate Config Information
===============================================================================
Candidate configuration state : modified
Num editors/viewers : 0
Candidate cfg exclusive locked : no
Num editors/viewers The number of CLI sessions currently in edit-cfg mode.
Candidate cfg
exclusive locked
Indicates if a user has exclusively locked the candidate using the
candidate edit exclusive command.
Last commit state • none — Indicates there have been no commits since the last reboot of the
node.
• in-progress — Indicates the system is currently committing the
candidate config.
• success — Indicates the last commit finished successfully.
• revert-pending — Indicates the last commit finished successfully but has
not been confirmed yet, and will be auto-reverted if it is not confirmed
before the timeout expires.
• failed — Indicates the last commit failed and has been undone.
• revert-in-progress — Indicates the last commit finished successfully but
was not confirmed in time and is currently being reverted.
• reverted — Indicates the last commit finished successfully but was not
confirmed in time and has been reverted.
• revert-failed — Indicates the last commit finished successfully but was
not confirmed in time and the system attempted to revert it but failed.
Last commit time The time at which the last commit attempt was started.
Checkpoint created
with last commit
Indicates if a rollback checkpoint was created after the previous commit
completed.
Scheduled revert time Used to indicate the currently scheduled auto-revert time based on the
confirmed option being used with a candidate commit.
Last commit revert
time
The time the commit was last reverted.
Users in edit-cfg
mode
Lists all the user sessions that are currently in edit-cfg mode.
Type (from) Indicates the type of session (such as Console, Telnet, etc.) and also the
source of the session (such as the source IP address of the remote host).
Table 22: Candidate output fields (Continued)
Label Description (Continued)
To Next Page
Loading...
