Show, Clear, Debug, and Tools Command Reference
456 Basic System Configuration Guide
Show Commands
show
— redundancy
— mgmt-ethernet
— multi-chassis
— all [detail]
— mc-endpoint statistics
— mc-endpoint peer [ip-address] statistics
— mc-endpoint endpoint [mcep-id] statistics
— mc-endpoint peer [ip-address]
— mc-lag [lag lag-id]
— peer [peer ip-address [lag lag-id]] mc-lag
— statistics
— mc-ring peer ip-address statistics
— mc-ring peer ip-address [ring sync-tag [detail | statistics]]
— mc-ring peer ip-address ring sync-tag ring-node [ring-node-name [detail | statistics]]
— mc-ring global-statistics
— sync [port port-id | lag-id
]
— peer [port port-id]
— detail
— synchronization
—time
— system
— alarm-contact-input {alarm-contact-input-id | all} [detail]
— card
— cpu [sample-period seconds]
— memory-pools
— connections [address ip-address [interface interface-name]] [port port-number] [detail]
— cpu [sample-period seconds]
— cron
— action
— schedule
— information
— lldp neighbor
— load-balancing-alg [detail]
— memory-pools
— ntp
— ptp [standby]
— ptp peers [router router-instance | service-name service-name
] [detail]
— ptp port
— ptp port port-id [detail]
— ptp statistics
— ptp unicast [router router-instance | service-name service-name]
— rollback
— script-control
— script [script-name] [owner script-owner]
— script-policy script-policy-name [owner owner-name]
— script-policy run-history [run-state]
— sntp
— switch-fabric
— sync-if-timing
— thresholds
To Next Page
Loading...
