System Management
Basic System Configuration Guide 515
Rem Lcl Deleted Entries : 0
Rem Alarm Entries : 0
===============================================================================
A:subscr_mgt_2#
peer
Syntax peer ip-address
Context show>redundancy>multi-chassis>sync
Description This command enables the context to display peer-related redundancy information.
Parameters ip-address — Shows peer information about the specified IP address.
Output The following table describes show redundancy multi-chassis sync output fields:
Table 64: Redundancy Multi-chassis Sync Peer Field Descriptions
Label Description
Peer IP Address Displays the multi-chassis redundancy peer.
Description The text string describing the peer.
Authentication If configured, displays the authentication key used between this node and
the multi-chassis peer.
Source IP Address Displays the source address used to communicate with the multi-chassis
peer.
Admin State Displays the administrative state of the peer.
Client Applications Displays the list of client applications synchronized between SRs.
Sync Admin State Displays the administrative state of the synchronization.
Sync Oper State Displays the operation state of the synchronization.
DB Sync State Displays the database state of the synchronization.
Num Entries Displays the number of entries on local router.
Lcl Deleted Entries Displays the number of deleted entries made at the local router.
Alarm Entries Displays the alarm entries on the local router.
Rem Num Entries Displays the number of entries on the remote router.
Rem Lcl Deleted
Entries
Displays the number of locally deleting entries made by the remote
router.
Rem Alarm Entries Displays alarm entries on the remote router.
To Next Page
Loading...
