Service Management Tasks
206 Basic System Configuration Guide
address 10.10.xx.xx/20 active
wait 3
primary-image cf3:\both.tim
primary-config cf3:\test123.cfg
primary-dns 192.168.xx.xx
persist on
dns-domain test.alcatel.com
==================================================================
A:ALA-1>bof#
Service Management Tasks
This section discusses the following service management tasks:
• System Administration Commands
→ Viewing the Current Configuration
→ Modifying and Saving a Configuration
→ Deleting BOF Parameters
→ Saving a Configuration to a Different Filename
System Administration Commands
Use the following administrative commands to perform management tasks.
CLI Syntax: A:ALA-1# admin
display-config
reboot [active | standby | upgrade] [hold] [now]
save [file-url] [detail] [index]
Viewing the Current Configuration
Use one of the following CLI commands to display the current configuration. The detail
option displays all default values. The index option displays only the persistent indices. The
info command displays context-level information.
CLI Syntax: admin# display-config [detail | index]
info detail
The following displays an example of a configuration file for the 7750 SR:
To Next Page
Loading...
