Alcatel-Lucent 7450 - Configuring Synchronization; Configuring Manual Synchronization; Forcing a Switchover

System Management
Basic System Configuration Guide 307
Configuring Synchronization
The switchover-exec command specifies the location and name of the CLI script file
executed following a redundancy switchover from the previously active CPM card.
CLI Syntax: admin>redundancy
synchronize {boot-env|config}
config>system
switchover-exec file-url
Configuring Manual Synchronization
Note that automatic synchronization can be configured in the config>system>
synchronization context.
CLI Syntax: admin
redundancy
synchronize {boot-env|config}
Example: admin>redundancy# synchronize config
The following shows the output which displays during a manual synchronization:
A:ALA-12>admin# synchronize config
Syncing configuration......
Syncing configuration.....Completed.
A:ALA-12#
Forcing a Switchover
The force-switchover now command forces an immediate switchover to the standby CPM
card.
CLI Syntax: admin>redundancy
force-switchover [now]
Example: admin>redundancy# force-switchover now
A:ALA-12# admin redundancy force-switchover now
A:ALA-12#
Resetting...