BOF Show Command Reference
226 Basic System Configuration Guide
Command Descriptions
BOF Show Commands
The command outputs in the following sections are examples only; actual displays may differ
depending on supported functionality and user configuration.
bof
Syntax bof [cflash-id | booted]
Context show
Description This command displays the Boot Option File (BOF) executed on last system boot or on the specified
device.
If no device is specified, the BOF used in the last system boot displays. If the BOF has been modified
since the system boot, a message displays.
Parameters cflash-id — The cflash directory name. The slot name is not case-sensitive. Use upper or
lowercase “A” or “B” for the slot name.
Values cf1:, cf1-A:, cf1-B:, cf2:, cf2-A:, cf2-B:, cf3:, cf3-A:, cf3-B:
booted — Displays the boot option file used to boot the system.
Output Show BOF Fields
The following table describes BOF output fields.
Table 28: Show BOF Output Fields
Label Description
primary-image The primary location of the directory that contains the runtime images
of both CPM and XCM/IOM.
primary-config The primary location of the file that contains the configuration.
primary-dns The primary DNS server for resolution of host names to IP addresses.
secondary-image The secondary location of the directory that contains the runtime
images of both CPM and XCM/IOM.
secondary-config The secondary location of the file that contains the configuration.
secondary-dns The secondary DNS server for resolution of host names to IP addresses.
To Next Page
Loading...
