Alcatel-Lucent 7450 - System Administration (Admin) Commands; System Synchronization Commands

System Command Reference
332 Basic System Configuration Guide
—no location
— [no] shutdown
System Administration (Admin) Commands
root
—admin
— application-assurance
— upgrade
— clear-policy-lock
— debug-save [file-url]
— disconnect {address ip-address | username user-name | console | telnet | ftp | ssh}
— display-config [detail | index]
— [no] enable-tech
— radius-discovery
— force-discover [svc-id service-id]
— reboot [active | standby | upgrade] [hold] [now]
— redundancy
— [no] cert-sync
— synchronize {boot-env | config}
—no synchronize
— save [file-url] [detail] [index]
—
synchronize [boot-env | config]
— tech-support [file-url]
System Synchronization Commands
config
—system
— sync-if-timing
— abort
— begin
— bits
— input
— [no] shutdown
— interface-type {ds1 [{esf | sf}] | e1 [{pcm30crc | pcm31crc}] 2048khz-g703}
—no interface-type
— output
— line-length {110, 220, 330, 440, 550, 660}
— [no] shutdown
— source {line-ref | internal-clock}
— ql-override {prs | stu | st2 | tnc | st3e | st3 | eec1 | sec | prc | ssu-a | ssu-b | eec2}
—no ql-override
— ssm-bit sa-bit
— commit
— ref-order first second [third [fourth]]
—no ref-order