System Management
Basic System Configuration Guide 537
ntp
Syntax [no] router router-name interface ip-int-name
Context debug>system
Description This command enables and configures debugging for NTP.
The no form of the command disables debugging for NTP.
Parameters router-name — Base, management
Default Base
ip-int-name — Maximum 32 characters; must begin with a letter. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
persistence
Syntax [no] persistence
Context debug>system
Description This command displays persistence debug information.
Tools Commands
redundancy
Syntax redundancy
Context tools>dump
Description This command enables the context to dump redundancy parameters.
multi-chassis
Syntax multi-chassis
Context tools>dump>redundancy
Description This command enables the context to dump multi-chassis parameters.
To Next Page
Loading...
