Administrative Tasks
284 Basic System Configuration Guide
Base MAC address : 14:30:ff:00:00:00
Admin chassis mode : d
Oper chassis mode : d
Hardware Data
Part number : Sim Part#
CLEI code : Sim CLEI
Serial number : sim48
Manufacture date : 01012003
Manufacturing string : Sim MfgString sim48
Manufacturing deviations : Sim MfgDeviation sim48
Time of last boot : 2007/09/24 08:15:17
Current alarm state : alarm cleared
-------------------------------------------------------------------------------
Environment Information
...
===============================================================================
*A:ALA-48#
Saving Configurations
Whenever configuration changes are made, the modified configuration must be saved so they
will not be lost when the system is rebooted.
Configuration files are saved by executing explicit command syntax which includes the file
URL location to save the configuration file as well as options to save both default and non-
default configuration parameters. Boot option file (BOF) parameters specify where the
system should search for configuration and image files as well as other operational
parameters during system initialization.
For more information about boot option files, refer to Boot Options.
Specifying Post-Boot Configuration Files
Two post-boot configuration extension files are supported and are triggered when either a
successful or failed boot configuration file is processed. The boot-bad-exec and boot-good-
exec commands specify URLs for the CLI scripts to be run following the completion of the
boot-up configuration. A URL must be specified or no action is taken.
For example, after a configuration file is successfully loaded, the specified URL can contain
a nearly identical configuration file with certain commands enabled or disabled, or particular
parameters specified and according to the script which loads that file.
To Next Page
Loading...
