Show, Clear, Debug, and Tools Command Reference
458 Basic System Configuration Guide
Debug Commands
debug
— sync-if-timing
— force-reference {ref1 | ref2 | bits | bits1 | bits2 | bitsa | bitsb | ptp}
—no force-reference
— [no] system
— http-connections [host-ip-address/mask]
—no http-connections
— ntp [router router-name] [interface ip-int-name]
— persistence
Tools Commands
tools
— dump
— redundancy
— multi-chassis
— mc-endpoint peer ip-address
— mc-ring
— mc-ring peer ip-address [ring sync-tag]
— sync-database [instance instance-id] [peer ip-address]
— sync-database [peer ip-address] [port port-id | lag-id] [sync-tag sync-tag]
[application application] [detail] [type type]
— resource-usage
— card [slot-num]
— card [slot-num] all
— fp [fp-number]
— mda [mda-slot]
— system [all]
— system-resources slot-number
—perform
—
redundancy
— mgmt-ethernet
— chassis
— set-role{standalone | master | extension}
— set-fabric-speed speed
— system
— inter-chassis
— sfm-interco-test [sfm x]
— mixed-mode-upgrade [slot-list] [now]
—perform
— system
— script-control
— script-policy
— stop [script-policy-name] [owner script-policy-owner] [all]
—cron
To Next Page