Basic CLI Command Reference
58 Basic System Configuration Guide
Basic CLI Commands
— back
— echo [text-to-echo] [extra-text-to-echo] [more-text] 
— enable-admin
— exec [-echo] [-syntax] filename
— exit [all]
— help
— history
— info [detail] [objective]
— logout
— mrinfo [ip-address | dns-name] [router router-instance]
— mstat source [ip-address | dns-name] [group grp-ip-address] [destination dst-ip-address] [hop hop] 
[router router-instance] [wait-time wait-time]
— mtrace source [ip-address | dns-name] [
group grp-ip-address] [destination dst-ip-address] [hop hop] 
[router router-instance] [wait-time wait-time]
— password
— ping {ip-address | dns-name} [rapid | detail] [ttl time-to-live] [tos type-of-service] [size bytes] [pattern 
pattern] [source ip-address] [interval seconds] [{next-hop ip-address} | {interface interface-name} 
|bypass-routing] [count requests] [do-not-fragment] [router [router-instance] [timeout timeout]
— pwc [previous]
— sleep [seconds]
—
ssh [ip-addr | dns-name |username@ip-addr] [-l username] [-v SSH-version] [router router-instance| 
service-name service-name] 
— telnet [ip-address| dns-name] [port] [router router-instance] 
— traceroute {ip-address | dns-name} [ttl value] [wait milliseconds] [no-dns] [source ip-address] [tos 
type-of-service] 
— tree [detail]
— write {user | broadcast} message-string
Monitor Commands
monitor
— card slot-number fp fp-number ingress {access | network} queue-group queue-group-name 
instance instance-id [interval seconds] [repeat repeat] policer policer-id [absolute | percent-rate | 
reference-rate]
— ccag ccag-id [path {a | b}] [type {sap-sap | sap-net | net-sap}] [interval seconds] [repeat repeat] 
[absolute | rate]
— cpm-filter
— ip entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— ipv6 entry entry-id [interval seconds] [
repeat repeat] [absolute | rate]
— mac entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— filter
— ip ip-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— ipv6 ipv6-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— mac mac-filter-id entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— lag lag-id [lag-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute 
| rate]
— management-access-filter
— ip entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
— ipv6 entry entry-id [interval seconds] [repeat repeat] [absolute | rate]