CLI Usage
Basic System Configuration Guide 77
router router-instance — Specify the router name or service ID.
Values
Default Base
telnet
Syntax telnet [ip-address | dns-name] [port] [router router-instance]
Context <global>
Description This command opens a Telnet session to a remote host. Telnet servers in SR-series networks limit a
Telnet clients to three retries to login. The Telnet server disconnects the Telnet client session after three
retries. The number of retry attempts for a Telnet client session is not user-configurable.
Parameters ip-address — The IP address or the DNS name (providing DNS name resolution is configured)
can be specified.
IPv6 applies to the 7750 SR and 7950 XRS.
Values
dns-name — Specify the DNS name (if DNS name resolution is configured).
Values 128 characters maximum
port — The TCP port number to use to Telnet to the remote host, expressed as a decimal integer.
Default 23
Values 1 to 65535
router router-instance — Specify the router name or service ID.
Values
Default Base
traceroute
Syntax traceroute {ip-address | dns-name} [ttl ttl] [wait milliseconds] [no-dns] [source ip-address]
router-name: Base, management
service-id: 1 to 2147483647
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0 to FFFF]H
d: [0 to 255]Dipv6-address
router-name: Base, management
service-id: 1 to 2147483647
To Next Page
Loading...
