EasyManua.ls Logo

Alcatel-Lucent 7450 - Configuring Mixed Mode

Alcatel-Lucent 7450
576 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Common Configuration Tasks
310 Basic System Configuration Guide
config>redundancy>multi-chassis>peer# description "Mc-
Lag peer 10.10.10.2"
config>redundancy>multi-chassis>peer# mc-lag
config>redundancy>mc>peer>mc-lag# lag 1 lacp-key 32666
system-id 00:00:00:33:33:33 system-priority 32888
config>redundancy>mc>peer>mc-lag# no shutdown
config>redundancy>mc>peer>mc-lag# exit
config>redundancy>multi-chassis>peer# no shutdown
config>redundancy>multi-chassis>peer# exit
config>redundancy>multi-chassis# exit
config>redundancy#
The following displays the configuration:
A:ALA-48>config>redundancy# info
---------------------------------------------
multi-chassis
peer 10.10.10.2 create
description "Mc-Lag peer 10.10.10.2"
mc-lag
no shutdown
exit
no shutdown
exit
exit
---------------------------------------------
A:ALA-48>config>redundancy#
Configuring Mixed Mode
The 7450 mixed mode feature allows a 7450 ESS-7 or ESS-12 chassis to utilize 7750 IOM3-
XPs, MDAs, and IMMs to enable 7750 SR capabilities on the associated slots. This allows
features such as multicast routing, VPRN and IPv6 support as well as others to be enabled on
existing 7450 systems.
The following are mixed-mode requirements:
SR capabilities (for example, IP-VPNs, IPv6 routing and multicast routing) can only
be associated with interfaces on 7750 IOM3-XPs, MDAs, and IMMs
Network interface ports must be located 7750 IOM3-XPs or IMMs
Only the 7750 SR IOM3-XPs, 7750 SR MDAs, or 7750 SR IMMs can be used in the
7450 ESS slots with SR capabilities enabled.
Notes:

Table of Contents

Other manuals for Alcatel-Lucent 7450

Related product manuals