File Management Tasks
178 Basic System Configuration Guide
interface faste 2/3
shutdown
exit
interface faste 2/4
A:ALA-1>file cf1:\ # version boot.tim
TiMOS-L-1.0.B3-8
A:ALA-1>file cf1:\ #
Repairing the File System
Use the repair command to check a compact flash device for errors and repair any errors
found.
Use the CLI syntax displayed below to check and repair a compact flash device:
CLI Syntax: file
repair [cflash-id]
The following example shows the command syntax:
A:ALA-1>file cf3:\ # repair
Checking drive cf3: on slot A for errors...
Drive cf31: on slot A is OK.
To Next Page
Loading...
