Basic CLI Command Reference
60 Basic System Configuration Guide
— neighbor ip-address [ip-address...(up to 5 max)] [interval seconds] [repeat repeat]
[absolute | rate]
— virtual-link nbr-rtr-id area area-id [interval seconds] [repeat repeat] [absolute |
rate]
— virtual-neighbor nbr-rtr-id area area-id [interval seconds] [repeat repeat] [absolute
| rate]
—pim
— group grp-ip-address [source ip-address] [interval seconds] [repeat repeat]
[absolute | rate]
—rip
— neighbor neighbor [neighbor...(up to 5 max)] [interval seconds] [repeat
repeat]
[absolute | rate]
—rsvp
— interface interface [interface...(up to 5 max)] [interval seconds] [repeat repeat]
[absolute | rate]
—vrrp
— instance interface interface-name vr-id virtual-router-id [interval seconds] [repeat
repeat] [absolute | rate]
— service
— id service-id
— sap sap-id [interval seconds] [repeat repeat] [absolute | rate]
— sdp sdp-id [far-end] ip-address [interval seconds] [repeat repeat] [absolute | rate]
— subscriber sub-ident-string sap sap-id
sla-profile sla-profile-name [base | ingress-queue-id
ingress-queue-id | egress-queue-id egress-queue-id] [interval seconds] [repeat repeat]
[absolute | rate]
Environment Commands
<root>
—environment
— alias alias-name alias-command-name
—no alias alias-name
— [no] create
— [no] more
— reduced-prompt [no. of nodes in prompt]
—no reduced-prompt
— [no] saved-ind-prompt
— suggest-internal-objects
— terminal
— length lines
— width width
— time-display {local | utc}
To Next Page