Alcatel-Lucent 7450 - PTP Commands

System Management
Basic System Configuration Guide 329
— description description-string
—no description
— location cflash-id
—no location
— dhcp-server
— description description-string
—no description
— location cflash-id
—no location
— nat-port-forwarding
— description description-string
—no description
— location cflash-id
—no location
— options
— dhcp-leasetime-threshold [days days] [hrs hours] [min minutes] [sec
seconds]
—no dhcp-leasetime-threshold
— python-policy-cache
— description description-string
—no description
— location cflash-id
—no location
— subscriber-mgmt
— description description-string
—no description
— location cflash-id
—no location
PTP Commands
Note: The commands in this section apply to the 7450 ESS and 7750 SR, except the 7750 SR-
1e, 7750 SR-2e, and 7750 SR-3e.
config
—system
— ptp
— anno-rx-timeout count
—no anno-rx-timeout
— clock-type boundary
— clock-type ordinary {master | slave}
— domain domain
—no domain
— local-priority local-priority
— log-anno-interval log-interval
—no log-anno-interval
— network-type {sdh | sonet}
— peer ip-address [create]
—no peer ip-address
— log-sync-interval log-interval