System Management
Basic System Configuration Guide 417
application-assurance
Syntax application-assurance
Context config>system>persistence
Description This command configures application assurance persistence parameters.
dhcp-server
Syntax dhcp-server
Context config>system>persistence
Description This command configures DHCP server persistence parameters.
nat-port-forwarding
Syntax nat-port-forwarding
Context config>system>persistence
Description This command configures NAT port forwarding persistence parameters.
options
Syntax options
Context config>system>persistence
Description This command enables the CLI context to configure persistence options parameters.
dhcp-leasetime-threshold
Syntax dhcp-leasetime-threshold [days days] [hrs hours] [min minutes] [sec seconds]
no dhcp-leasetime-threshold
Context config>system>persistence>options
Description This command configures Dynamic Data Persistence (DDP) compact flash access optimization for
DHCP leases.
The DHCP lease-time threshold controls the eligibility of a DHCP lease for persistency updates when
no data other than the lease expiry time is to be updated. When the offered lease time of the DHCP
lease is less than the configured threshold, the lease is flagged to skip persistency updates and will be
installed with its full lease time upon a persistency recovery after a reboot.
To Next Page
Loading...
