Basic CLI Command Reference
166 Basic System Configuration Guide
local-max-checkpoints
Syntax local-max-checkpoints local-max-checkpoints
Context config>system>rollback
Description Configures the maximum number of rollback checkpoint files when the rollback-location is on local
compact flash.
Default 10
Parameters local-max-checkpoints — 1 to 50
remote-max-checkpoints
Syntax remote-max-checkpoints remote-max-checkpoints
Context config>system>rollback
Description Configures the maximum number of rollback checkpoint files when the rollback-location is remote
(for example, ftp).
Default 10
Parameters remote-max-checkpoints — 1 to 200
Management Infrastructure Control Commands
management
Syntax management {cli}
Context config>system
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cflash-id cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|cf2-B:| cf3:|cf3-A:|cf3-B:
rescue filename suffixed with .rc during rescue file creation
To Next Page
Loading...
