Alcatel-Lucent 7450 - Page 165

CLI Usage
Basic System Configuration Guide 165
Default None. A valid rollback-location must be configured before a rollback save is executed.
Parameters file-url — Specifies the URL.
Values
rollback-filename — Specifies the rollback file name.
Values Suffixed with .rb, .rb.1 up to .9 during rollback checkpoint
creation
rescue-location
Syntax no rescue-location file-url
Context config>system>rollback
Description The location and filename of the rescue configuration is configurable to be local (on compact flash) or
remote. The suffix .rc will be automatically appended to the filename when a rescue configuration file
is saved. Trivial FTP (TFTP) is not supported for remote locations.
Default None. A valid rescue location must be configured before a rescue configuration is saved.
Parameters file-url — Specifies the URL.
Values
local-url | remote-url
local-url [cflash-id/][file-path] 200 chars max, including flash-id directory length 99
chars max each
remote-url [{ftp://}login:pswd@ remote-locn/][file-path] 255 chars max directory
length 99 chars max each
remote-locn [hostname | ipv4-address | ipv6-address]
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cflash-id cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|cf2-B:| cf3:|cf3-A:|cf3-B:
local-url | remote-url
local-url [cflash-id/][file-path] 200 chars max, including flash-id directory length 99
chars max each
remote-url [{ftp://}login:pswd@ remote-locn/][file-path] 255 chars max directory
length 99 chars max each
remote-locn [hostname | ipv4-address | ipv6-address]