Basic CLI Command Reference
164 Basic System Configuration Guide
Context admin>rollback
Description This command displays the checkpoint.
Default none
Parameters latest-rb — Specifies the most recently created rollback checkpoint (corresponds to the file-url.rb
rollback checkpoint file).
checkpoint-id — Indicates rollback checkpoint file to be viewed. Checkpoint-id of 1 corresponds
to the file-url.rb.1 rollback checkpoint file. The higher the id, the older the checkpoint. Max
is the highest rollback checkpoint supported or configured.
Values 1 to max
rescue — View the rescue configuration.
view
Syntax view {bootup-cfg | active-cfg | candidate-cfg | latest-rb | checkpoint-id | rescue}
Context <root>
Description The context to configure administrative system viewing parameters. Only authorized users can execute
the commands in the admin context.
Default none
Parameters bootup-cfg — Specifies the bootup configuration.
active-cfg — Specifies current running configuration.
candidate-cfg — Specifies candidate configuration.
latest-rb — Specifies the latest configuration.
checkpoint-id — Specifies a specific checkpoint file configuration.
Values 1 to 9
rescue — Specifies a rescue checkpoint configuration.
rollback-location
Syntax rollback-location file-url/rollback-filename
Context config>system>rollback
Description The location and name of the rollback checkpoint files is configurable to be local (on compact flash)
or remote. The file-url must not contain a suffix (just a path/directory + filename). The suffixes for
rollback checkpoint files are “.rb”, ".rb.1", ..., ".rb.9" and are automatically appended to rollback
checkpoint files.
To Next Page
Loading...
