CLI Usage
Basic System Configuration Guide 65
If you navigated to the current level by entering a command string, then the exit command returns the
cursor to the context in which the command was initially entered.
A:ALA-1# configure router ospf
A:ALA-1>config>router>ospf# exit
A:ALA-1#
The exit all command moves the cursor all the way back to the root level.
A:ALA-1# configure
A:ALA-1>config# router
A:ALA-1>config>router# ospf
A:ALA-1>config>router>ospf# exit all
A:ALA-1#
Parameters all — Exits back to the root CLI context.
help
Syntax help
help edit
help global
help special-characters
Context <global>
Description This command provides a brief description of the help system. The following information displays:
Help may be requested at any point by hitting a question mark '?'.
In case of an executable node, the syntax for that node will be displayed with an
explanation of all parameters.
In case of sub-commands, a brief description is provided.
Global Commands:
Help on global commands can be observed by issuing "help globals" at any time.
Editing Commands:
Help on editing commands can be observed by issuing "help edit" at any time.
Parameters help — Displays a brief description of the help system.
help edit — Displays help on editing.
Available editing keystrokes:
Delete current character.....................Ctrl-d
Delete text up to cursor.....................Ctrl-u
Delete text after cursor.....................Ctrl-k
Move to beginning of line....................Ctrl-a
Move to end of line..........................Ctrl-e
Get prior command from history...............Ctrl-p
Get next command from history................Ctrl-n
Move cursor left.............................Ctrl-b
Move cursor right............................Ctrl-f
Move back one word...........................Esc-b
Move forward one word........................Esc-f
To Next Page
Loading...
