Basic CLI Command Reference
70 Basic System Configuration Guide
Parameters detail — Displays all configuration parameters including parameters at their default values.
objective — Provides an output objective that controls the configuration parameters to be
displayed.
Values include-dynamic — includes configuration parameters from
dynamic sources such as vsd or dynamic data service Python
scripts
logout
Syntax logout
Context <global>
Description This command logs out of the router session.
When the logout command is issued from the console, the login prompt is displayed, and any log IDs
directed to the console are discarded. When the console session resumes (regardless of the user), the
log output to the console resumes.
When a Telnet session is terminated from a logout command, all log IDs directed to the session are
removed. When a user logs back in, the log IDs must be re-created.
mrinfo
Syntax mrinfo [ip-address | dns-name] [router router-instance]
Context <global>
Description This command is used to print relevant multicast information from the target multicast router.
Information displayed includes adjacency information, protocol, metrics, thresholds, and flags from
the target multicast route.
Parameters ip-address — Specify the ip-address of the multicast capable target router.
dns-name — Specify the DNS name (if DNS name resolution is configured).
Values 63 characters maximum
router router-instance — Specify the router name or service ID.
Values router-name: Base, management
service-id: 1 to 2147483647
Default Base
mstat
Syntax mstat source [ip-address | dns-name] [group grp-ip-address] [destination dst-ip-address]
To Next Page
Loading...
