Show, Clear, Debug, and Tools Command Reference
538 Basic System Configuration Guide
mc-endpoint
Syntax mc-endpoint peer ip-address
Context tools>dump>redundancy>multi-chassis
Description This command dumps multi-chassis endpoint information.
Parameters peer ip-address — Specifies the peer’s IP address.
Output
Sample Output
*A:Dut-B# tools dump redundancy multi-chassis mc-endpoint peer 3.1.1.3
MC Endpoint Peer Info
peer addr : 3.1.1.3
peer name : Dut-C
peer name refs : 1
src addr conf : Yes
source addr : 2.1.1.2
num of mcep : 1
num of non-mcep : 0
own sess num : 58ba0d39
mc admin state : Up
tlv own mc admin state : Up
tlv peer mc admin state : Up
reachable : Yes
own sys priority : 50
own sys id : 00:03:fa:72:c3:c0
peer sys priority : 21
peer sys id : 00:03:fa:c6:31:f8
master : No
conf boot timer : 300
boot timer active : No
conf ka intv : 10
conf hold on num of fail : 3
tlv own ka intv : 10
tlv peer ka intv : 10
ka timeout tmr active : Yes
ka timeout tmr intvl : 20
ka timeout tmr time left : 4
peer ka intv : 10
mc peer timed out : No
initial peer conf rx : Yes
peer-mc disabled : No
initial peer conf sync : Yes
peer conf sync : Yes
own passive mode : Disable
peer passive mode : No
retransmit pending : No
non-mcep retransmit pending : No
To Next Page
Loading...
