System Management
Basic System Configuration Guide 413
Description This command performs RADIUS discovery operations.
force-discover
Syntax force-discover [svc-id service-id]
Context admin>radius-discovery
Description When enabled, the server is immediately contacted to attempt discovery.
Parameters svc-id service-id — Specifies an existing service ID.
Values 1 to 2147483648 | svc-name, up to 64 char max
tech-support
Syntax tech-support [file-url]
Context admin
Description This command creates a system core dump. If the file-url is omitted, and a ts-location is defined, then
the tech support file will have an automatic SR OS generated file name based on the system name and
the date and time and will be saved to the directory indicated by the configured ts-location.
The format of the auto-generated filename is ts-XXXXX.YYYYMMDD.HHMMUTC.dat where:
• XXXXX: system name with special characters expanded to avoid problems with file systems
(for example, a '.' is expanded to %2E.)
• YYYYMMDD: Date with leading zeros on year, month and day
• HHMM: Hours and Minutes in UTC time (24hr format, always 4 chars, with leading zeros on
hours and minutes)
Parameters file-url — The file URL location to save the binary file.
Values
Note: This command should only be used with authorized direction from the Alcatel-Lucent
Technical Assistance Center (TAC).
local-url | remote-url
local-url [cflash-id/][file-path] 200 chars max, including cflash-id
directory length 99 chars max each
remote-url [ftp://login:pswd@remote-locn/][file-path]
247 chars max
directory length 99 chars max each
To Next Page
Loading...
