System Command Reference
412 Basic System Configuration Guide
Parameters file-url — The file URL location to save the configuration file.
Default The primary configuration file location.
Values
detail — Saves both default and non-default configuration parameters.
index — Forces a save of the persistent index file regardless of the persistent status in the BOF
file. The index option can also be used to avoid an additional boot required while changing
your system to use the persistence indices.
enable-tech
Syntax [no] enable-tech
Context admin
Description This command enables the shell and kernel commands.
radius-discovery
Syntax radius-discovery
Context admin
local-url | remote-url
local-url [cflash-id/][file-path] 200 chars max, including cflash-id
directory length 99 chars max each
remote-url [ftp://login:pswd@remote-locn/][file-path]
247 chars max
directory length 99 chars max each
remote-locn [hostname | ipv4-address | "["ipv6-address"]" ]
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cflash-id cf1:|cf1-A:|cf1-B:|cf2:|cf2-A:|cf2-B:|cf3:|cf3-A:|cf3-B:
Note: This command should only be used with authorized direction from the Alcatel-Lucent
Technical Assistance Center (TAC).
To Next Page
Loading...
