Boot Options
Basic System Configuration Guide 227
tertiary-image The tertiary location of the directory that contains the runtime images
of both CPM and XCM/IOM.
tertiary-config The tertiary location of the file that contains the configuration.
address The IP address and mask associated with the CPM Ethernet port or the
secondary CPM port.
tertiary-dns The tertiary DNS server for resolution of host names to IP addresses.
persist on
Persistent indexes between system reboots is enabled.
off
Persistent indexes between system reboots is disabled.
wait The time configured for the boot to pause while waiting for console
input.
autonegotiate no autonegotiate
Autonegotiate not enabled.
autonegotiate
Autonegotiate is enabled.
duplex half
Specifies that the system uses half duplex.
full
Specifies that the system uses full duplex.
speed The speed of the CPM Ethernet interface.
console speed The console port baud rate.
dns domain The domain name used when performing DNS address resolution.
uplinkA-address Displays the Uplink-A IP address.
uplinkA-port Displays the primary port to be used for auto-boot.
uplinkA-route Displays the static route associated with Uplink-A.
uplinkA-vlan Displays the VLAN ID to be used on Uplink-A.
uplinkB-address Displays the Uplink-B IP address.
uplinkB-port Displays the secondary port to be used for auto-boot.
uplinkB-route Displays the static route associated with Uplink-B.
uplinkB-vlan Displays the VLAN ID to be used on Uplink-B.
Table 28: Show BOF Output Fields (Continued)
Label Description
To Next Page
Loading...
