Alcatel-Lucent 7450 - Page 228

BOF Show Command Reference
228 Basic System Configuration Guide
Sample Output
A:ALA-1# show bof cf3:
=====================================================================
BOF on cf3:
=====================================================================
autonegotiate
primary-image ftp://test:test@192.168.xx.xx/./both.tim
primary-config ftp://test:test@192.168.xx.xx/./1xx.cfg
secondary-image cf1:/i650/
secondary-config cf1:/config.cfg
address 192.168.xx.xxx/20 active
address 192.168.xx.xxx/20 standby
primary-dns 192.168.xx.xxx
dns-domain test.test.com
autonegotiate
duplex full
speed 100
wait 2
persist off
console-speed 115200
===============================================================================
A:ALA-1#
A:ALA-1# show bof booted
=====================================================================
System booted with BOF
=====================================================================
primary-image ftp://test:test@192.168.xx.xx/./both.tim
primary-config ftp://test:test@192.168.xx.xx/./103.cfg
secondary-image cf1:/i650/
secondary-config cf1:/config.cfg
address 192.168.xx.xxx/20 active
address 192.168.xx.xxx/20 standby
primary-dns 192.168.xx.xxx
dns-domain test.test.com
autonegotiate
duplex full
speed 100
wait 2
persist off
console-speed 115200
===============================================================================
A:ALA-1#
uplink-mode Displays the uplink mode of the device.
no-service-ports Displays the ports on which service traffic is not processed.
use-expansion-card-
type
Displays the expansion card type.
Table 28: Show BOF Output Fields (Continued)
Label Description