Boot Options
Basic System Configuration Guide 229
boot-messages
Syntax boot-messages
Context show
Description This command displays boot messages generated during the last system boot.
Output Show Boot Messages Fields
The following output shows boot message output fields.
Sample Output for the 7750 SR
ALA-## show boot-messages
Boot log started on CPU#0
Build: X-1.2.B1-7 on Thurs Jan 13 14:49:23 201 by builder
CPUCTL FPGA version: 2A
Forcing BDB controller to HwSlot 0
Performing Power on Diagnostics
>>>Testing mainboard FPGA chain...
JTAG chain length = 2
All requested FPGAs on chain programmed
>>>Validating SDRAM from 0x21f00000 to 0x22000000
>>>Testing SDRAM from 0x02200000 to 0x21f00000
>>>Testing Compact Flash 1... Slot Empty
>>>Testing Compact Flash 2... Slot Empty
>>>Testing Compact Flash 3... OK (TOSHIBA THNCF128MBA)
Wales peripheral FPGA version is 0x13
Hardware Slot 31
Card type in EEPROM is 0x6, 'england_r1'
MDA #1: HwType 0x02, 'denmark_r1', Serial Number 'de3-52'
MDA #2: HwType 0x16, 'hungary_ds3_e3_12_r1', Serial Number 'hun01-02'
Board Serial Number is 'eng02-15'
Chassis type 4 (sr1) found in BP 1 EEProm
Chassis Serial Number is '0203210096'
JTAG chain length = 2
All requested FPGAs on chain programmed
Searching for boot.ldr on local drives:
Searching cf3 for boot.ldr...
********************************************************
Loaded 0x001bc191 bytes from cf3 to 0x80400000
Decompressing to address 0x0a000000
Starting code...
Total Memory: 512MB Chassis Type: sr1 Card Type: england_r1
TiMOS-L-1.2.B1-7 boot/hops/T2.02 Copyright (c) 2000-2011 Alcatel, Inc.
Built on Thurs Jan 13 15:15:25 2003 by builder in /rel1.2/b1/B1-7/panos/main
TiMOS BOOT LOADER
Time from clock is Thurs Jan 13 08:39:03 2011 UTC
Error: could not open boot messages file.
Boot messages will not be stored.
Looking for cf3:/bof.cfg ... OK, reading
Contents of Boot Options File on cf3:
To Next Page
Loading...
