Show, Clear, Debug, and Tools Command Reference
514 Basic System Configuration Guide
Sample Output
*A:subscr_mgt_2# show redundancy multi-chassis sync
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.20
Description : Mc-Lag peer 10.10.10.20
Authentication : Disabled
Source IP Address : 0.0.0.0
Admin State : Enabled
-------------------------------------------------------------------------------
Sync-status
-------------------------------------------------------------------------------
Client Applications : SUBMGMT
Sync Admin State : Up
Sync Oper State : Up
DB Sync State : inSync
Num Entries : 1
Lcl Deleted Entries : 0
Alarm Entries : 0
Rem Num Entries : 1
Authentication If configured, displays the authentication key used between this node and
the multi-chassis peer.
Source IP Address Displays the source address used to communicate with the multi-chassis
peer.
Admin State Displays the administrative state of the peer.
Client Applications Displays the list of client applications synchronized between SRs.
Sync Admin State Displays the administrative state of the synchronization.
Sync Oper State Displays the operation state of the synchronization.
DB Sync State Displays the database state of the synchronization.
Num Entries Displays the number of entries on local router.
Lcl Deleted Entries Displays the number of deleted entries made at the local router.
Alarm Entries Displays the alarm entries on the local router.
Rem Num Entries Displays the number of entries on the remote router.
Rem Lcl Deleted
Entries
Displays the number of locally deleting entries made by the remote router.
Rem Alarm Entries Displays alarm entries on the remote router.
Table 63: Redundancy Multi-chassis Sync Field Descriptions (Continued)
Label Description
To Next Page
Loading...
